Send your size, use, and a photo or sample. We’ll come back with options and a quote.
Email: sales@magneteva.com

Hot-stamping EVA foam carries a metallic foil design pressed into its surface. Heat and pressure transfer gold, silver, bronze or holographic foil onto the foam, leaving a bright logo or pattern that stands out against the foam color. It is a simple way to put a brand mark on a box insert, a gift piece or a display. MAGNETEVA was founded in 2009.
What it is
The base is an EVA foam sheet in the color you choose. The foil design is applied to the face of the foam, where it catches the light. A logo can also be embossed into the foam, which gives a raised or pressed mark in the foam color itself.
Options
| Option | What you can choose |
|---|---|
| Foil | Gold, silver, bronze or copper, and holographic |
| Design | Your logo, a pattern or custom artwork |
| Embossed mark | Logo embossed into the foam |
| Base foam | Foam color to your requirement |
| Format | Stamped sheets, sheets cut to size, or stamped die-cut inserts |
Dark foam such as black, navy or deep red makes gold and silver foil stand out most. Light foam suits bronze and holographic designs. If you are not sure, tell us the look you want and we’ll suggest a combination.
Where hot-stamping EVA foam is used
- Gift packaging: box inserts and lids with a foil logo.
- Branded packaging: inserts for cosmetics, electronics and consumer products. See die-cut inserts.
- Cases: a foil logo on the insert or lid of an EVA case.
- Promotional items: branded foam pieces for events and corporate gifts.
- Displays: foil-marked trays and shop display pieces.
- Decoration: foil patterns on decorative foam pieces.
What to send with your inquiry
- Your logo or design as a vector file, with the size it should appear.
- The foil color, and the foam color you want under it.
- The size of the sheet or insert, and where the design should sit.
- What the stamped piece is for.
Send your size, use, and a photo or sample. We’ll come back with options and a quote.
Email: sales@magneteva.com
How a custom hot-stamping order works
- Send your inquiry with size, use and a sample, drawing or photo.
- We check the artwork, confirm foil color, foam and stamp position, and quote.
- We prepare the stamp and make a sample for you to check.
- Production follows the approved sample.
- Stamped sheets or inserts are packed so the foil face is protected, then shipped.
We customize to customer requirements from a sample, drawing or photo. Tell us your quantity and we’ll suggest the right option.
FAQ
What artwork do you need for hot stamping?
A vector file such as AI, PDF or SVG of your logo or design, with the size it should appear. Fine lines and very small text can be hard to stamp clearly, so send the artwork and we’ll tell you if anything needs adjusting.
Which foil colors can I choose?
Gold, silver, bronze or copper, and holographic.
Can you stamp a logo on a finished insert?
Yes. We can stamp the sheet before cutting or stamp the insert itself, so the logo sits where you want it. Send the insert drawing and the logo position.
What is the difference between hot stamping and printing?
Hot stamping gives a metallic foil finish. For full-color designs, see printed EVA foam.
How many do I need to order?
Tell us your quantity and we’ll suggest the right option. Send us your details and we’ll get back to you with options.
Related products
- Printed EVA Foam
- Flocking EVA Foam
- Embossed EVA Foam
- Die-Cut EVA Packaging Inserts
- Custom EVA Packaging & Inserts
Send us your details and we’ll get back to you with options.